Search results for: 'may'

Health & Safety FAQ's Using Photographic Chemicals whilst Pregnant or Breast Feeding This is covered in our health and safety section,  Where can I find you Health and Safety Data Sheets Please visit our health and safety section, where all our MSDS can be found What ventilation do I need in my darkroom?  Smells and fumes from darkroom chemicals and heat from enlargers and lamps are best eliminated by some sort of extract in the room OR by opening the room up between processes. If you ...

Processing your own film can speed up your workflow and give you quicker access to your negatives. It is also typically more cost effective and best of all there is nothing like the sense of satisfaction you will gain by taking control over the full end-to-end process of your photography. While trying it for the first time might be a daunting prospect, fear not. Below is our guide on what equipment, chemistry and method would be suitable for anyone new to processing films. For more detail, you can downlo...

The first stage of making a darkroom print is to determine the exposure time. If you have already created a contact sheet of your negatives, and they appear correctly exposed, then you should have a rough idea of the necessary exposure (provided you haven’t moved the enlarger head or aperture setting after exposing the contact sheet). Note: If you change the degree of enlargement you will also need to adjust the exposure. Some enlargers have scales printed on their columns to make this easier. Another...

Contact sheets are a great way to review and record your images. They allow you to view all the negatives on a roll of film before deciding which ones you want to print and how you may want to crop them. They also provide a permanent record of those negatives for filing purposes. How to make a contact sheet To make a contact sheet we recommend using ILFORD MULTIGRADE RC DELUXE Set the enlarger head to a height that gives a 40cm (16in) wide rectangle of light on the baseboard Put a MULTIGRADE fil...

Our Address ILFORD PHOTO Ilford Way Mobberley Knutsford Cheshire WA16 7JL Directions: Click here for map and directions to the Mobberley site (PDF). Email:  If you can't find the answer that you are looking for in our FAQs pages then please e-mail us  - Please note that at this current time, there may be a delay in us responding to your email. Phone +44 (0)1565 650000 Registered office: HARMAN technology Limited, Whittington Hall, Whittington Road, Worcester, WR5 2ZX, England. Register...

General health and safety advice This section provides advice to our customers on the safe handling, use and storage of our photochemical solutions, best practice for waste disposal and specific advice to women who are pregnant or breastfeeding a child. If you are looking for information on the chemical safety of HARMAN photochemistry solutions, please refer to the Safety Data Sheets (known as SDS or MSDS) 24 HOUR OHES emergency line for advice on chemical incidents Safe working practices It is essen...

Photographic prints are intended to be viewed and when looked after can remain in excellent condition for over a century. However, as they are paper-based they are prone to damage if mishandled. Caring for a print A print intended to have a long life should be processed by methods recommended for long-term stability. If necessary it can be retouched to eliminate blemishes. Prints that are going to be displayed should be mounted, framed and glazed to complement the image and protect it from deteriorat...

Mounting your Prints Even the most stunning print can look better when it has been properly mounted. Mounted prints are also better protected as they are kept flat with the image separated from the immediate surroundings by unobtrusive margins. There are no hard and fast rules about mounting prints; the most suitable results will depend on individual preference, the nature of the image, the intended use and other circumstances. It is recommended that only boards and other materials intended for the p...

Testing your Safelights Safelights are an essential component in any darkroom set up. We recommend testing them annually, as ageing can change the transmission characteristics of the filters. This can cause visible fogging of the print or, more likely, a subtle but noticeable drop in contrast. When setting up your safelights always read the instructions and don't exceed the recommended bulb wattage. Fitting a brighter bulb or mounting your safelight too close to your developing dishes,  may cause degra...

Split grade printing The version of split grade printing described here is that taught to me by the ILFORD head printers, Mike Walden and Terry Offord, and is the simplest, fastest way to make good darkroom prints from pretty much any negative. (The exception is really underexposed negatives to print these you usually only need high contrast). This is a very powerful technique that can be used routinely with variable contrast (VC) papers, such as ILFORD MULTIGRADE. It makes use of the differing performa...