Search results for: 'di place'

The first stage of making a darkroom print is to determine the exposure time. If you have already created a contact sheet of your negatives, and they appear correctly exposed, then you should have a rough idea of the necessary exposure (provided you haven’t moved the enlarger head or aperture setting after exposing the contact sheet). Note: If you change the degree of enlargement you will also need to adjust the exposure. Some enlargers have scales printed on their columns to make this easier. Another...

Having shot a roll of black and white film it now needs to be processed to create the negatives. At this point your film is still light sensitive so should not be exposed to light. Processing your own film can be highly satisfying and cost effective. It is also easy to learn. The most common method for hand processing film is undertaken by using a Daylight Processing Tank. This piece of kit needs the film to be loaded on to a ‘spiral’ or ‘reel’, in the dark, and then enclosed in a light tight co...

When photographic material is exposed to light it begins to darken. The more light the material receives, the darker it becomes. This opens up a range of possibilities for making fun, creative and artistic images without a camera. Making a picture without a camera couldn’t be easier and is a fun activity to try with children. However, for many, exploring and experimenting with different effects of light on photographic /blog/the-luminogram-process/materials can become an art form by itself. Where to sta...

ILFORD PHOTO technical downloads On this page we have collated all of our technical information in one place. Whether you are looking for technical data sheets, our film processing chart or information relating to contrast control for our MULTIGRADE Papers this is where you will find it. All relevant technical information can also be found at the bottom of each specific product page. Technical Data Sheets Here you will find links to all technical data sheets for our film, paper and chemical products. ...

General health and safety advice This section provides advice to our customers on the safe handling, use and storage of our photochemical solutions, best practice for waste disposal and specific advice to women who are pregnant or breastfeeding a child. If you are looking for information on the chemical safety of HARMAN photochemistry solutions, please refer to the Safety Data Sheets (known as SDS or MSDS) 24 HOUR OHES emergency line for advice on chemical incidents Safe working practices It is essen...

Photographic prints are intended to be viewed and when looked after can remain in excellent condition for over a century. However, as they are paper-based they are prone to damage if mishandled. Caring for a print A print intended to have a long life should be processed by methods recommended for long-term stability. If necessary it can be retouched to eliminate blemishes. Prints that are going to be displayed should be mounted, framed and glazed to complement the image and protect it from deteriorat...

A black border often enhances a print and does not involve any sort of mounting or overlay. Ink or tape borders The easiest way to produce narrow black borders is to rule them with a pen directly onto your finished print: an India-ink pen gives the most solid line, but most permanent (all surface) spirit based markers are much less expensive and will do the job. For slightly wider black borders, narrow, self-adhesive strips are available from graphic arts suppliers. Supplied in dispensers, of various w...

Mounting your Prints Even the most stunning print can look better when it has been properly mounted. Mounted prints are also better protected as they are kept flat with the image separated from the immediate surroundings by unobtrusive margins. There are no hard and fast rules about mounting prints; the most suitable results will depend on individual preference, the nature of the image, the intended use and other circumstances. It is recommended that only boards and other materials intended for the p...

Split grade printing The version of split grade printing described here is that taught to me by the ILFORD head printers, Mike Walden and Terry Offord, and is the simplest, fastest way to make good darkroom prints from pretty much any negative. (The exception is really underexposed negatives to print these you usually only need high contrast). This is a very powerful technique that can be used routinely with variable contrast (VC) papers, such as ILFORD MULTIGRADE. It makes use of the differing performa...

What is the luminogram process? The Luminogram process is light, directed onto photo paper in the darkroom. About as basic as ‘photography’ can get. It has been with us for a long while. László Moholy-Nagy (1895-1946) started using it in 1922, while Gottfried Jäger described it as "the result of pure light design; the rudimentary expression of an interaction of light and photosensitive material… a kind of self-representation of light." And yet it has always seemed to sit on the sideline...