Search results for: 'hand tra that this'

Loading...

Items 1 to 10 of 212 total

Page
Show per page
  • You have loaded film into your camera, composed your image and pressed the shutter. You have now captured an image on your film. When that film is processed, it reverses the tones of the subject. In simple terms, the image is dark where the subject was light, and light where the subject was dark. That resulting image is known as a negative. What do I do with them? Negatives are normally then used to make prints by reversing the image a second time to restore the light and dark areas to their original tone...
  • Whether you are new to film photography or picking it up again after a number of years, it is very easy to get started and a rewarding activity regardless of your level of expertise. Introduction to film photography To get you started we've created a series of animations that will introduce you to the world of film photography. These short 60 second animated videos cover a range of topics and terminologies to quickly get you up to speed. From f-stop to film types, these videos are the perfect entry point...
  • Hand colouring The idea of adding colour to a monochrome image by hand dates back to the beginning of photography. At this time it was the only way to get a colour photograph. Although colour photography using the three colour process was put forward just short of thirty years after the first photograph by Nicephore Niepce,  it was, in its early years, expensive and difficult to produce a colour image. Hand colouring became a practical way to give the impression of colour and everything from Daguerroty...
  • General FAQS Where can I find technical information about your products? We provide a comprehensive set of technical information to support all our products. Links to the technical information can be found on the product pages on the website. Advice for Airport X-ray scanners: Film & papers We are working with the DFT and Heathrow airport in the UK and will shortly be updating our information relating to the new CT type x-ray scanners being installed at major airports worldwide. Based on our init...
  • Film and single use cameras How long after exposing can I leave my film before processing? For best results, we always advise processing soon after exposure although in practice most films can be left for several months. One exception is ILFORD PANF Plus, we would always advise processing this film as soon as possible and certainly within 3 months of the film being exposed. How do I account for film reciprocity during long exposures? This information can be found in the Film Reciprocity Failure Compensa...
  • Photographic Paper FAQ's Which paper product is best/suitable for photograms.  All of our ILFORD photographic papers will easily produce photograms, so the choice will depend on which surface finish you prefer and whether or not you want fibre or resin coated. Resin coated paper is lower cost, easy to process and dry flat and would be a good choice for starting out. Does reciprocity affect paper? Paper products are designed for much longer exposure times than film and are less sensitive to reciprocity...
  • This guide focuses on the photo chemicals you can use for processing film. We also have a guide to processing film as well as some handy tips on loading a developing spiral. Choosing photo chemicals We have a range of photo chemicals designed to give different results with our films and papers. The choice of stop bath and fixer is limited but we have several film developers you can use. Film developers come in either liquid and powder concentrate form and have a range of attributes. Some developers giv...
  • Processing your own film can speed up your workflow and give you quicker access to your negatives. It is also typically more cost effective and best of all there is nothing like the sense of satisfaction you will gain by taking control over the full end-to-end process of your photography. While trying it for the first time might be a daunting prospect, fear not. Below is our guide on what equipment, chemistry and method would be suitable for anyone new to processing films. For more detail, you can downlo...
  • Why print? When you can get excellent prints from your black & white negatives by sending them off to commercial processing laboratories, why make your own? For many photographers, making a photographic print is as much a part of the process as shooting the image itself. For a start, it is a creative process that is both enjoyable and fulfilling and, much like the role of a post processing tools such as Photoshop or Lightroom in any digital workflow, (although much more fun) a darkroom provides film...
  • Having shot a roll of black and white film it now needs to be processed to create the negatives. At this point your film is still light sensitive so should not be exposed to light. Processing your own film can be highly satisfying and cost effective. It is also easy to learn. The most common method for hand processing film is undertaken by using a Daylight Processing Tank. This piece of kit needs the film to be loaded on to a ‘spiral’ or ‘reel’, in the dark, and then enclosed in a light tight co...

Items 1 to 10 of 212 total

Page
Show per page